<div class="content-rich-box rich-text-" ><div class="law-answer-wrapper-highlight">LM6134BIM低功耗10 MHz轨到轨输入/输出运算放大器 [Low Power 10 MHz Rail-to-Rail I/O
产物概述
The LM6134BIM is a quad low power Operational Amplifier with rail-to-rail input and output. It provides new levels of speed vs. power performance in applications where low voltage supplies or power limitations previously made compromise necessary. With only 360µA/amplifier supply current, the 10MHz gain-bandwidth of this device supports new portable applications where higher power devices unacceptably drain battery life. The LM6134 can be driven by voltages that exceed both power supply rails, thus eliminating concerns over exceeding the common-mode voltage range. The rail-to-rail output swing capability provides the maximum possible dynamic range at the output. This is particularly important when operating on low supply voltages. The LM6134 can also drive large capacitive loads without oscillating. Operating on supplies from 2.7 to over 24V, the LM6134 is excellent for a very wide range of applications.
-0.25 to 5.25V Rail-to-rail input CMVR
0.01 to 4.99V Rail-to-rail output swing
360µA/amplifier Low supply current
100dB CMRR
100dB with RL=10k Gain
82dB PSRR
5µV/°C Typical offset drift
供给商:拍明芯城
应用
便携式器材, 传感与仪器, 无线, 通信与网络, 信号处置 |